Adult diaper production line adult diapers are disposable incontinence products, one of the adult care products, mainly applied to a waste diaper used by incontinent adults. Traditional adult diapers are similar to baby diapers, consisting of leak-proof bottom layer, absorbent core, hydrophilic surface layer and water-repellent side paste, and the water-repellent side produces side walls to avoid side leakage. However, since most users of adult diapers are ambulatory patients and adults defecate a lot; therefore, adult diapers are prone to leakage during use, but adult diapers do not have a structure to improve the above leakage phenomenon. In view of the above, the applicant conceived an adult diaper with a water-repellent rear wing; in order to realize the industrial production of the above adult diaper, there is an urgent need to develop a production line for the above adult diaper and a corresponding production process.
Features of the adult diaper production line: including water-repellent flank loop, water-repellent rear flank loop, hydrophilic surface loop, rubber transport part and water-repellent composite part; the above water-repellent flank loop crosses with the water-repellent composite part to form a water-repellent surface loop, the rubber transport part leads to the rubber loop, and the rubber loop crosses with the water-repellent flank loop upstream of the water-repellent composite part; the above water-repellent composite part includes an air inlet conveyor belt and a slitting knife transfer device, and the air inlet conveyor belt includes a water-repellent flank loop. The above water-repellent composite part includes air inlet conveyor belt and slitter knife transfer device, the air inlet conveyor belt assumes the above water-repellent flank loop, the slitter knife transfer device can transfer the water-repellent rear flank cutting section on the water-repellent rear flank loop to the air inlet conveyor belt; the above hydrophilic surface loop crosses with the composite transfer roller to form a surface loop, and all the above junctions are provided with spraying parts upstream.